Prompt Title: Arduino LED color changing.

Sure, here's the modified code for controlling 6 different LED strips separately:

arduinoCopy code
#include <FastLED.h>

// Define the number of LED strips and LEDs per strip
#define NUM_STRIPS 6
#define NUM_LEDS_PER_STRIP 6

// Define the pins used for each LED strip
#define STRIP_1_PIN 2
#define STRIP_2_PIN 3
#define STRIP_3_PIN 4
#define STRIP_4_PIN 5
#define STRIP_5_PIN 6
#define STRIP_6_PIN 7

// Create an array of CRGB objects for each LED strip
CRGB leds[NUM_STRIPS][NUM_LEDS_PER_STRIP];

void setup() {
  // Initialize each LED strip
  FastLED.addLeds<WS2812B, STRIP_1_PIN, GRB>(leds[0], NUM_LEDS_PER_STRIP);
  FastLED.addLeds<WS2812B, STRIP_2_PIN, GRB>(leds[1], NUM_LEDS_PER_STRIP);
  FastLED.addLeds<WS2812B, STRIP_3_PIN, GRB>(leds[2], NUM_LEDS_PER_STRIP);
  FastLED.addLeds<WS2812B, STRIP_4_PIN, GRB>(leds[3], NUM_LEDS_PER_STRIP);
  FastLED.addLeds<WS2812B, STRIP_5_PIN, GRB>(leds[4], NUM_LEDS_PER_STRIP);
  FastLED.addLeds<WS2812B, STRIP_6_PIN, GRB>(leds[5], NUM_LEDS_PER_STRIP);
}

void loop() {
  // Set the color of each LED in each strip
  for (int strip = 0; strip < NUM_STRIPS; strip++) {
    for (int led = 0; led < NUM_LEDS_PER_STRIP; led++) {
      // Calculate the color for this LED
      CRGB color;
      switch (led) {
        case 0:
          color = CRGB::Red;
          break;
        case 1:
          color = CRGB::Green;
          break;
        case 2:
          color = CRGB::Yellow;
          break;
        case 3:
          color = CRGB::Magenta;
          break;
        case 4:
          color = CRGB::Blue;
          break;
        case 5:
          color = CRGB::Aqua;
          break;
      }

      // Set the color for this LED in this strip
      leds[strip][led] = color;
    }
  }

  // Show the new LED colors for each strip
  for (int strip = 0; strip < NUM_STRIPS; strip++) {
    FastLED.show(leds[strip], NUM_LEDS_PER_STRIP);
  }

  // Wait for 1 minute
  delay(60000);
}

In this modified code, we first define the number of LED strips and LEDs per strip. We then define the pins used for each LED strip, and create an array of CRGB objects for each strip.

In the setup function, we initialize each LED strip using the FastLED.addLeds function.

In the loop function, we set the color of each LED in each strip using a nested for loop. We use a switch statement to calculate the color for each LED based on its position in the strip. We then set the color of each LED in each strip using the leds array.

After setting the color of all the LEDs, we use another for loop to show the new LED colors for each strip